Quadra-Fire 3100 Series Istruzioni per gli Interventi Pagina 18
- Pagina / 32
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Page 18
1. Remove ash removal system top and
bottom cover plates by loosening nuts
under stove.
2. Discard both plates.
3. Insert ash removal system grate into
opening in firebox floor.
4. Continue with proper installation
according to model you have purchased:
pedestal or leg.
ASH REMOVAL SYSTEM INSTALLATION
1. Place protective pad or stove pallet on floor.
2. Lay body of stove on its back on protective
pad or pallet.
3. Line up holes in ash removal system with
holes in adapter on bottom of stove.
4. Screw ash removal system securely in place.
5. Slide pedestal over ash removal system, and
line up holes in sides of pedestal with holes
in adapter on bottom of stove.
6. Screw pedestal into place, and tighten
securely.
7. Carefully stand stove up and place in desired
location.
8. Slip wooden decorative strips onto pedestal
edges.
9. Open door of stove and check to insure
firebricks and kaowool blanket are in
their proper locations (see pages 25-26).
PEDESTAL MODEL
LEG MODEL
1. Place protective pad or stove pallet on floor.
2. Lay body of stove on its back on protective
pad or pallet.
3. Line up holes in ash removal system with
holes in adapter on bottom of stove.
4. Screw ash removal system in place.
5. Bolt cover pieces onto mounting brackets,
using outer two mounting holes.
6. Slip washers onto bolts, then bolt legs onto
mounting brackets.
7. Screw leg assembly onto adapter on bottom
of stove using eig
ht ¼”-20 screws.
8. Carefully stand stove up and place in
desired location.
9. Use leveling bolts on legs to stabilize and
level stove.
10. Open door of stove and check to insure
firebricks and kaowool blanket are in
their proper locations (see pages 25-26).
- North America’s Best 1
- TABLE OF CONTENTS 2
- 3100 SAFETY LABEL 3
- (found on back of stove) 3
- DIMENSIONS 4
- SAFETY LISTING 7
- VENTING SYSTEM 7
- CHIMNEY CONNECTOR 8
- CHIMNEY HEIGHT/DRAFT 8
- FIGURE 4 9
- FIGURE 5 9
- FIGURE 6 10
- FIGURE 7 10
- FIGURE 8 11
- FIGURE 9 12
- FIGURE 10 13
- FIGURE 11 13
- FIGURE 12 14
- MOBILE HOME INSTALLATION 15
- OUTSIDE AIR KIT INSTALLATION 16
- PEDESTAL/LEG KIT INSTALLATION 17
- PEDESTAL MODEL 18
- LEG MODEL 18
- OPERATING INSTRUCTIONS 20
- BLOWER OPERATING INSTRUCTIONS 21
- OPERATING TIPS 21
- BURNING GUIDELINES 21
- BURNING GUIDELINES (cont.) 22
- BUILDING A FIRE 22
- WOOD SELECTION AND STORAGE 22
- MAINTENANCE 23
- DOOR HANDLE ASSEMBLY 24
- GLASS REPLACEMENT 24
- BRICK PATTERN 26
- Part #831-1700 27
- BLOWER SWITCH ADJUSTMENTS 27
- TOP HEAT SHIELD INSTALLATION 28
- ACCESSORIES AND SERVICE PARTS 29
Prodotti e manuali riguardandi Stufe Quadra-Fire 3100 Series
(40 pagine)
Stufe Quadra-Fire Quadra-Fire 2700-I Specifiche
(28 pagine)
(28 pagine)
Progress PBN12001X manuels
Manuels d'utilisation et guides de l'utilisateur pour Fours Progress PBN12001X.
Nous fournissons des manuels en pdf 1 Progress PBN12001X à télécharger gratuitement par type de document : Manuel de l'utilisateur
Commenti su questo manuale